Hacker Newsnew | past | comments | ask | show | jobs | submit | defraudbah's commentslogin

the exploit is to make camera disconnect and connect to your wifi, that's how they MITM, pretty long process unless you do it often

could be automated though?

yes, everything can be automated, and as you people don't always have time to automate everything, so it depends if your area has many c200 which is a home camera, not outdoor

correct, it's in beta testing right now, you can check for alternatives https://github.com/wltechblog/thingino-installers

it does not, there are 5 versions of C200 as of now and thingino only supports one or two, it is very important to get the right chip, you can check https://openipc.org/

depends on your router, but you would want to stick to onvif or rtsp and connect to the camera using some sort of tailscale. Don't fail for installing open source firmware, there is only thingino and openipc, both are hard to install if you are a beginner, even if people say it's easy for technical specialist, it's not

They're also limited to older hardware, newer 3K+ cameras aren't supporter. Different chip in use, I guess, or there manufacturers have learned to sign this firmware and burn in the keys.

it's a stretch to call it generic hardware, all of cheap cameras use similar hardware, but every few months there is a new version of chip which you need to adjust to. It's challenging to find an exact chip if you want to, because they get out of date faster than JS frameworks

I used this website to research the camera https://drmnsamoliu.github.io/

this is the third article about it, we know, good times are over, will start migrating towards something else

It definitely adds to frustration for some people; this can not be denied.

Consider tangled.org :)

don’t lie you’ll just bitch and moan and keep using it anyway

the downvotes are from those who can’t cope with this truth

one was from your mom though

it explains github actions update better than github

this article explains release better than github itself https://www.blacksmith.sh/blog/actions-pricing

I didn't find a single example of any of the upcoming features, should I follow them in github to read release notes?


they are only building "ai" features now

No, the AI is only building AI features now, or so they say.

Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: