Hacker Newsnew | past | comments | ask | show | jobs | submit | chiph's commentslogin

Many years ago, I worked on a project in Tennessee where the bank was installing computers in their branches (previously the tellers were using mainframe terminals). At the same time, they were consolidating the leased data lines to the branches to save money, as everything there was now a network device - including the ATMs.

The IBM representative on our team was working behind the through-the-wall ATM, routing some wires when a customer walked up (you could see them via the camera). Being a prankster, he started talking to her in a robotic voice: "Please insert card", "Please choose a transaction", etc. After a few of these he couldn't hold back any further and started laughing. The customer got the joke and started laughing too: "I knew someone was back there!"

Briefly, he was their first (and only) talking ATM.


IBM terminals were the original stateless clients. :)

I had a PS/2 Portable 70 for a while. It was a luggable Microchannel PC with a orange plasma display. Going through airports with it was a hassle as it didn't have batteries - I would have to find an outlet to power it on for airport security inspection.


It's about a 12 minute walk in Austin, from Hobbiton Trail to Mordor Cove.

https://maps.app.goo.gl/EgUb7EXTaHguiPKJ7


I finished treatment for prostate cancer this summer. Most of my time in the x-ray machine was spent getting the alignment right. They'd take a CT scan, do some image analysis and other computations, then adjust the table some small amount before turning the beam on.

I'm curious how they do the alignment with the histotripsy machine. I would think that they could obviously do an ultrasound scan to get the gross alignment correct. But perhaps there is a CT scan afterwards that lets them make the fine alignment. It probably also helps that the liver is a much larger gland so aiming is less critical?


I'm not sure how they do it exactly. I know just the nature of the machine is that it has a massive array of ultrasound emitters and sensors.


Ideally it'd just be software driven. Take an ultrasound scan, adjust, blast. In theory this could be done in milliseconds to counter patient movements. Pretty nifty really!


This is because the upstate (of South Carolina) has a large eastern European population, dating back to some of the churches there welcoming in ex-Soviets in the 1990's. The new families (Ukraine, Belarus, etc.) didn't get the MMR vaccine, so now they're vulnerable.


This has nothing to do with Ukraine or Eastern Europe and everything to do with Americans not willing to have their kids vaccinated. Which is result of right wing propagandists who wanted to achieve exactly this and got rewarded for it.


24 of the cases originated at a church where the congregation is primarily eastern European. But to your point - as long as the local population is below 95% fully vaccinated, it's going to spread. Regardless of national origin or religious & personal beliefs.

https://www.goupstate.com/story/news/local/2025/12/11/sparta...


I absolutely loved my Moto X with the walnut back. I switched to an iPhone when it stopped getting security patches.

It was built back when Google owned Motorola, before they sold off everything but the patent suite. And was intended to be their flagship phone - which the Pixel later became. Looking at the GrapheneOS FAQ, it doesn't look like I have a prayer of installing it on such an old device as it doesn't have the needed security hardware. Is there a lightweight Android install available?


I've rooted and installed a few custom ROM's on phones back on the day, nothing recent though.

Here is a good place to get started with your Moto X. https://xdaforums.com/c/moto-x.2449/


25H2 is better than previous versions, where I used Beyond Compare to do file copies because explorer.exe would crash, corrupting the copy. Still needs a lot of work to improve reliability.


If you have access to the wiring diagrams, I have seem people apply 12v to the correct pins to reverse the motor, moving the piston back from the rotor.


You don't need a diagram when confronted with a necessarily reversible motor and a 2-pin connector....


Some have position sensors built in (so the computer knows where things are). But yes - if you only have 2 pins it's self-explanatory.


> They will also be asked to use their iPhone to read the chip embedded on the back of their passport to ensure the data’s authenticity.

I installed an RFID app from the Apple app store (3rd party, not from Apple) and it couldn't read the chip in my passport. Perhaps Apple's firmware was filtering those out at the time?


I was able to use the (free) app “ReadID Me” to decode passport information months ago


Like many people, I throw my change into a jar when I get home. One time I only kept pennies and used an old apple cider jug. Turns out that a gallon of pennies is worth almost $55 [0]. And that carrying a heavy glass jug filled with pennies to the Coinstar machine is very anxiety inducing.

Speaking of which - the Coinstar machines near me will give you several options for redemption. Some of which have been Amazon and Home Depot e-gift codes that have no redemption fee.

[0] A potential worthless interview question...


You probably could have made $150 if you had melted the coins and sold the copper instead.


A penny is less than 3% copper (since 1982).


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: